How To Set Up Directv Remote To Samsung Tv

A universal remote tin can be used to control any Smart TV and other devices at dwelling house. So, you don't need to worry when your Tv set remote is not working. Y'all can use a universal remote to control soundbars, gaming consoles, streaming devices, media players, VCRs, sound sets, smart TVs, and many more. DirecTV universal remote is one of the popular universal remotes. If your Samsung Telly remote is not working, you can programme DirecTV universal remote to control your Samsung Television receiver.

How to Program DirecTV Remote to Samsung Smart Goggle box

Earlier stepping into the process, you must prepare your TV to programme your DirecTV remote.

• Connect the DirecTV receiver to your Samsung Television receiver via HDMI
• Check the batteries in your Samsung and DirecTV remotes

Program DirecTV Remote

1. Check the DirecTV remote, whether it is working properly or not.

2. Printing the Carte du jour button on the DirecTV remote.

three. Nether that, navigate to Settings >> Remote Control.

iv. Click on the Program Remote selection.

Pair DirecTV Remote using Samsung TV Code

Next, you lot take to start the programming process on the Samsung TV to recognize the DirecTV remote.

1. Indicate your DirecTV remote towards your Samsung TV.

2. Press and hold down the Mute and Select buttons on DirecTV remote until the LED on the top of your remote flashes twice.

3. Now, release the push button and enter the code 54000. If you have one-time Samsung TVs, so you tin can type the 0101 code.

4. Click on Pair/Program Remote nether the Program remote tab.

v. Tap on the Modify Telly selection.

6. Await for the Tv set to redirect you to the next tab.

seven. At present, type Samsung Television receiver and press the OK push button on the remote.

8. And then, printing the Power push on the DirecTV remote to cheque whether your Samsung TV turns off or not.

9. You lot tin too press the Volume Up on the DirecTV button to check if the volume is increasing on your Samsung TV.

How to program the DirecTV Genie Remote to Samsung Tv set

1. Press and hold the Mute and Select buttons until a green light blinks twice.

2. Enter the 961 lawmaking on the Genie remote.

3. Press the Channel up button and printing Enter.

4. Now, the Tv will display Your remote is at present ready upward for RF. Press OK on the remote.

5. At present, turn on your Samsung TV and press the Bill of fare button on the remote.

6. Navigate to Settings >> Remote Command >> Plan Remote.

seven. Choose the device name that you want to control.

viii. Follow the on-screen prompts to complete the programming process.

Related: How to change HDMI settings on Samsung Television.

DirecTV Remote Not Working on Samsung Boob tube: All-time Fixes

In example the DirecTV remote that you have paired with Samsung Telly is non working, yous can follow the fixes given below to solve the issues.

• Hard reset your Samsung Boob tube and DirecTV receiver.
• Power Cycle the DirecTV remote
• Alter the batteries in the remote
• Bank check the code that yous take entered
• Check for obstacles

That'southward it. Now, you can chop-chop programme the DirecTV remote to Samsung TV. If the DirecTV remote is not working, you tin reset the remote.

Frequently Asked Questions

1. Can I programme the DirecTV remote to Samsung TV?

Yes, you can program the DirecTV remote to Samsung Goggle box using the remote codes.

2. How to programme DirecTV remote RC72 to Samsung Television set?

For RC72, you can use the steps mentioned for the Genie remote.

Source: https://smarttvtricks.com/how-to-program-directv-remote-to-samsung-tv/

Share this post