How To Set Up Telstra Smart Wifi Booster

Telstra Wi-Fi Booster Set-up

Set-up guide

How to ready and identify your Booster to better a low Wi-Fi signal.

Place the Wi-Fi Booster close to your Modem* .
This is so that the units tin be paired earlier the Booster can exist moved to the depression Wi-Fi area in your dwelling.
- Check that you have the Wi-Fi Booster, power adapter and yellow-ended cablevision.
  * Check your modem base for model details. If it is not the Telstra Gen 2 Smart Modem or DJA0230, contact Telstra.
Connect the xanthous-ended cable.
- Insert one yellow cease of the cablevision into the yellow port at the back of the Wi-Fi Booster.
- Insert the other yellow end into whatsoever of the yellow ports on the dorsum of the Modem.
Power up the Wi-Fi Booster.
- Plug the Booster power adapter into a power point so that your equipment is set upwardly as per the diagram above.
- Switch the ability indicate on.
- Cheque that there is at present a low-cal showing on the forepart of the Wi-Fi Booster.
  If there is no light, press the power push button on the lower back corner of the unit (refer to diagram on the Troubleshooting folio for its location).
Look for the pairing process to complete.
The light on the forepart of the unit will modify colour during the process.
- The light will pulse between purple and blue when starting up.
- The low-cal will turn a solid blue afterwards 3 minutes.
  Wait an additional 2 minutes later the solid blue light appears to ensure that the pairing procedure is complete.
Go prepare to move.
The Wi-Fi Booster is now paired and prepare to be moved to its new location in your home.
- Unplug the Wi-Fi Booster power adapter.
- Detach the yellow-ended cable from both units.
  You will non need to apply the yellowish-ended cable once more during this set-up process. Store it somewhere prophylactic as you will need information technology again if the units need to be paired in the future.
Move the Wi-Fi Booster to its new location where the Wi-Fi indicate is depression.
- Plug the Wi-Fi Booster into a ability bespeak and switch the power on.
- Sentry the low-cal on the front of the unit. The light should pulse betwixt majestic and blueish, and will so settle to the solid blueish low-cal within iii minutes.

Refer to the Troubleshooting page if the lite shows amber and not solid bluish. This means that the Wi-Fi Booster has been moved too far away from the Modem. Ready-upwardly is now complete. Enjoy the improved Wi-Fi service!

Troubleshooting Tips.

What does my Wi-Fi Booster lite mean?

Solid Blueish: The set-up has been successful. Yous have a strong connexion back to your Modem.
Majestic: The software is updating, pairing or starting up. Proceed the device switched on and wait 5 minutes for the calorie-free to plough solid bluish. If the imperial start-upwards light does not alter colour, press the Wi-Fi Booster power button* to switch information technology off. Wait 30 seconds and turn it back on to consummate updates.
Amber: A poor point. The Wi-Fi Booster is too far away from the Modem. Simply movement the Wi-Fi Booster closer to the Modem until you succeed in getting the solid bluish low-cal.
This footstep may involve some trial and fault until yous find the correct spot.
Red: No connection to the Modem. Press the ability button* to switch the unit off, wait thirty seconds and plow it back on again to complete updates. If the scarlet light reappears, repeat Steps 1–six from the set-up procedure to pair the Modem with the Wi-Fi Booster.
No light: No power source or the Wi-Fi Booster unit of measurement is non switched on. Cheque that the power adapter is plugged into a working power betoken and switched on. If there is still no light showing, push the ability button at the back of the Wi-Fi Booster.